Acme Construction Supply is a building supplier and contractor serving Oregon. Listing compiled from public OpenStreetMap and website data — contact the builder to confirm current services, coverage, and pricing.
Cost index 110 · West Coast
Oregon building costs.
Real, state-adjusted estimates for Oregon — every figure here is computed with Oregon's labor and material rates, 10% above the national average. A 40×60 pole-barn shell runs $39,600 – $79,200; a finished barndominium, $269,129 – $631,230.
Example estimates
What buildings cost in Oregon.
These are live cost-engine outputs with Oregon's regional multipliers applied — not generic averages. Adjust size, finish, and options in the calculator for your exact build.
| Building | Size | Estimated cost | Per sq ft |
|---|---|---|---|
| Pole barn | 40×60 (2,400 sq ft) | $39,600 – $79,200 | $17 – $33/sq ft |
| Pole barn | 30×40 (1,200 sq ft) | $43,404 – $94,809 | $36 – $79/sq ft |
| Metal building | 40×60 (2,400 sq ft) | $42,240 – $89,760 | $18 – $37/sq ft |
| Barndominium | 40×60 (2,400 sq ft) | $269,129 – $631,230 | $112 – $263/sq ft |
Computed from the BarnCostHub cost engine using Oregon's labor multiplier 1.15 and material multiplier 1.05. Shell = erected structure; turnkey and finished configs add the items noted.
Real data used
Estimates are grounded in 101 real projects across 25 states, refreshed automatically.
- real projects
- 101 real projects
- states
- 25 states
- last updated
- Jun 2026 last updated
Cost per square foot
Oregon cost per square foot.
Oregon's 110 cost index sits 10% above the national average, which moves every $/sq ft figure below up or down from the national baseline.
| Configuration | Cost per sq ft |
|---|---|
| Pole barn shell | $17 – $33/sq ft |
| Metal building shell | $18 – $37/sq ft |
| Turnkey pole-barn shop | $36 – $79/sq ft |
| Finished barndominium | $112 – $263/sq ft |
What sets the Oregon rate
- Labor multiplier 1.15 — above average rates.
- Material multiplier 1.05 — freight & local demand.
- Moderate snow, high wind engineering loads.
Climate considerations
Building for the Oregon climate.
Moderate snow
trusses are rated for real seasonal accumulation.
High wind
stronger anchoring and bracing are specified.
High seismic
seismic design adds engineering and connection cost.
Wet, mild west of the Cascades; high-desert east; with a major Cascadia seismic risk on the coast.
Coastal and valley sites carry serious Cascadia seismic design; the mountains add snow load. Steel’s fire resistance helps in the dry east.
Permit considerations
Permits & code in Oregon.
Strict statewide Oregon code with seismic and energy provisions, consistently enforced.
Agricultural exemptions are limited. Thorough plan review including seismic; agricultural exemptions are narrower than in the farm-belt states.
Permitting rules change and vary by jurisdiction — always confirm with your local building department before you build.
Labor market
The Oregon labor market.
Labor cost tier
above average
- Labor multiplier
- 1.15
- Material multiplier
- 1.05
- Overall cost index
- 110
Key markets: Portland, Salem, Eugene
Portland’s strong trades and prevailing-wage rules push labor above the national average.
Labor is the multiplier that swings most between states, which is why Oregon's totals land 10% above the national average. Material prices (lumber and steel) move closer to nationally, so the regional spread you see above is driven mainly by crew rates and availability.
FAQ
Oregon building cost questions.
How much does a pole barn cost in Oregon?
A 40×60 post-frame shell in Oregon runs about $39,600 – $79,200 ($17 – $33/sq ft), reflecting the state's 110 cost index — 10% above the national average. A turnkey 30×40 shop with a slab, insulation, doors, and power is roughly $43,404 – $94,809.
How much does a barndominium cost in Oregon?
A fully finished 40×60 barndominium in Oregon is approximately $269,129 – $631,230. The post-frame shell saves on structure, but interior finishes, plumbing, and HVAC cost about the same here as in any Oregon home.
Is Oregon expensive to build in?
Oregon's construction cost index is 110 (national average = 100), putting it 10% above the national average. Labor is above average (OR labor multiplier 1.15), while materials run a multiplier of 1.05. Portland’s strong trades and prevailing-wage rules push labor above the national average.
Do I need a permit to build a pole barn in Oregon?
Strict statewide Oregon code with seismic and energy provisions, consistently enforced. Agricultural exemptions are limited in Oregon. Thorough plan review including seismic; agricultural exemptions are narrower than in the farm-belt states. Always confirm requirements with your specific city or county before building.
What climate factors affect building in Oregon?
Wet, mild west of the Cascades; high-desert east; with a major Cascadia seismic risk on the coast. In practice that means trusses are rated for real seasonal accumulation, stronger anchoring and bracing are specified, and seismic design adds engineering and connection cost. Coastal and valley sites carry serious Cascadia seismic design; the mountains add snow load. Steel’s fire resistance helps in the dry east.
Price & plan your Oregon build
Costs in nearby states
Get it built
Builders in Oregon
Vetted builders serving Oregon. Request a quote and compare — no obligation.
Metal Building
Advanced Metal Technology is a metal building contractor based in Oakland, Oregon. They build metal buildings. Listing compiled from public OpenStreetMap and website data — contact the builder to confirm current services, coverage, and pricing.
AG Fabrication is a construction company based in Christmas Valley, Oregon. Listing compiled from public OpenStreetMap and website data — contact the builder to confirm current services, coverage, and pricing.
Get your Oregon estimate.
Dial in your size, foundation, and finish with Oregon pricing already applied — then take a number you trust to your builder.