Citadel Construction is a carpentry and construction company serving Wyoming. Listing compiled from public OpenStreetMap and website data — contact the builder to confirm current services, coverage, and pricing.
Cost index 96 · Mountain West
Wyoming building costs.
Real, state-adjusted estimates for Wyoming — every figure here is computed with Wyoming's labor and material rates, 4% below the national average. A 40×60 pole-barn shell runs $34,560 – $69,120; a finished barndominium, $236,021 – $553,404.
Example estimates
What buildings cost in Wyoming.
These are live cost-engine outputs with Wyoming's regional multipliers applied — not generic averages. Adjust size, finish, and options in the calculator for your exact build.
| Building | Size | Estimated cost | Per sq ft |
|---|---|---|---|
| Pole barn | 40×60 (2,400 sq ft) | $34,560 – $69,120 | $14 – $29/sq ft |
| Pole barn | 30×40 (1,200 sq ft) | $38,219 – $83,456 | $32 – $70/sq ft |
| Metal building | 40×60 (2,400 sq ft) | $36,864 – $78,336 | $15 – $33/sq ft |
| Barndominium | 40×60 (2,400 sq ft) | $236,021 – $553,404 | $98 – $231/sq ft |
Computed from the BarnCostHub cost engine using Wyoming's labor multiplier 0.94 and material multiplier 0.98. Shell = erected structure; turnkey and finished configs add the items noted.
Real data used
Estimates are grounded in 101 real projects across 25 states, refreshed automatically.
- real projects
- 101 real projects
- states
- 25 states
- last updated
- Jun 2026 last updated
Cost per square foot
Wyoming cost per square foot.
Wyoming's 96 cost index sits 4% below the national average, which moves every $/sq ft figure below up or down from the national baseline.
| Configuration | Cost per sq ft |
|---|---|
| Pole barn shell | $14 – $29/sq ft |
| Metal building shell | $15 – $33/sq ft |
| Turnkey pole-barn shop | $32 – $70/sq ft |
| Finished barndominium | $98 – $231/sq ft |
What sets the Wyoming rate
- Labor multiplier 0.94 — below average rates.
- Material multiplier 0.98 — freight & local demand.
- Heavy snow, high wind engineering loads.
Climate considerations
Building for the Wyoming climate.
Heavy snow
higher ground-snow loads add framing and truss cost.
High wind
stronger anchoring and bracing are specified.
Moderate seismic
some seismic bracing applies in affected counties.
Cold, snowy, and the windiest state in the Lower 48, with seismic activity near Yellowstone.
Relentless wind is the signature load — anchoring and bracing are critical — and mountain snow plus NW seismic add to it.
Permit considerations
Permits & code in Wyoming.
No statewide building code; a few cities and resort counties enforce, but most of the state does not.
Agricultural exemptions are widely available. One of the least-regulated states for rural building; Teton County (Jackson) is the strict, expensive exception.
Permitting rules change and vary by jurisdiction — always confirm with your local building department before you build.
Labor market
The Wyoming labor market.
Labor cost tier
below average
- Labor multiplier
- 0.94
- Material multiplier
- 0.98
- Overall cost index
- 96
Key markets: Cheyenne, Casper, Jackson
Modest rates statewide, but the Jackson Hole resort market is in a cost class of its own.
Labor is the multiplier that swings most between states, which is why Wyoming's totals land 4% below the national average. Material prices (lumber and steel) move closer to nationally, so the regional spread you see above is driven mainly by crew rates and availability.
FAQ
Wyoming building cost questions.
How much does a pole barn cost in Wyoming?
A 40×60 post-frame shell in Wyoming runs about $34,560 – $69,120 ($14 – $29/sq ft), reflecting the state's 96 cost index — 4% below the national average. A turnkey 30×40 shop with a slab, insulation, doors, and power is roughly $38,219 – $83,456.
How much does a barndominium cost in Wyoming?
A fully finished 40×60 barndominium in Wyoming is approximately $236,021 – $553,404. The post-frame shell saves on structure, but interior finishes, plumbing, and HVAC cost about the same here as in any Wyoming home.
Is Wyoming expensive to build in?
Wyoming's construction cost index is 96 (national average = 100), putting it 4% below the national average. Labor is below average (WY labor multiplier 0.94), while materials run a multiplier of 0.98. Modest rates statewide, but the Jackson Hole resort market is in a cost class of its own.
Do I need a permit to build a pole barn in Wyoming?
No statewide building code; a few cities and resort counties enforce, but most of the state does not. Agricultural exemptions are widely available in Wyoming. One of the least-regulated states for rural building; Teton County (Jackson) is the strict, expensive exception. Always confirm requirements with your specific city or county before building.
What climate factors affect building in Wyoming?
Cold, snowy, and the windiest state in the Lower 48, with seismic activity near Yellowstone. In practice that means higher ground-snow loads add framing and truss cost, stronger anchoring and bracing are specified, and some seismic bracing applies in affected counties. Relentless wind is the signature load — anchoring and bracing are critical — and mountain snow plus NW seismic add to it.
Price & plan your Wyoming build
Costs in nearby states
Get it built
Builders in Wyoming
Vetted builders serving Wyoming. Request a quote and compare — no obligation.
51+ yrs in business
Contractors Supply is a building supplier and contractor serving Wyoming. In business roughly 51 years. Listing compiled from public OpenStreetMap and website data — contact the builder to confirm current services, coverage, and pricing.
Metal Building
METAL LLC is a metal building contractor based in Etna, Wyoming. They build metal buildings. Listing compiled from public OpenStreetMap and website data — contact the builder to confirm current services, coverage, and pricing.
Get your Wyoming estimate.
Dial in your size, foundation, and finish with Wyoming pricing already applied — then take a number you trust to your builder.